Mechanical and Electrical Suppliers

DC Power & Energy

LACP100A AC Distribution Panel

The LACP100A is a 120VAC, 2 wire, 100Amp AC distribution panel that can be populated with SquareD breakers. This AC distribution panel is used where it is necessary to provide overcurrent protection or separation of a single source into multiple feeds on the output of an AC source. This panel can either be wall-mounted or mounted in a 19" or 23" relay rack.

Lorain IS 3000

Stand alone, rack-mounted inverters provide a pure sine wave 120VAC, 60 Hertz, output from a 48VDC input. The output range of these inverters is from 300VA to 3000VA. The inverters can be rack mounted in a 23-inch rack.

Lorain IS 6000

The modular design of the Lorain® IS 6000 provides for easy expansion from 1kVA up to a 6kVA maximum output depending on the configuration required. The system can be purchased with  either a 2,4 or 6kVA cabinet output. The compact, hot-pluggable 1kVA inverter modules provide a pure sine wave 120VAC output from a 48VDC input.

Lorain IS 21000

The Lorain® IS 21000 provides a pure sine wave 120 VAC, 60 Hertz, 21kVA maximum output from a 48VDC input. The system is composed of a seven-foot cabinet equipped with wiring to support six 3.5kVA inverters and two inverters for redundancy. 

Lorain -190VDC Converter System

The Lorain® -190VDC Converter System provides -190 VDC bulk power for broadband FTTx. The 190VDC Converter System utilizes state of the art technology to provide the highest power density and system reliability in the industry combined with the most cost effective method of powering FTTx networks.

NetSure DCS 48375

The NetSure® DCS 48375 modular DC to DC converter system provides up to 375 amps at -48V DC via high frequency switch mode converters rated at 1500 watts (31 amps) each.  The DCS 48375 converter system is comprised of a main shelf and up to two expansion shelves.

Lorain -48VDC to +24VDC Converters

20 to 80 Amp DC-DC Converter Mounting Frame with 20 Amp Converter Modules

NetSure DCS 4830

The NetSure® DCS 4830 modular DC to DC converter shelf provides up to 30 amps at -48V DC via high frequency switch mode converters rated at 10 amps each.  The DCS 4830 converter shelf can accept three individual, 10-amp plug-in converter modules.